UltralightHunter

Just like our World record holding bench rest stocks these stocks are engineered for the correct
stiffness to weight ratio using state of the art processes during manufacturing. The outer shells are
made with multiple layers of 100% aircraft grade carbon fiber. They are hand laid with high
temperature epoxy resins, placed under a vacuum, and heat cured to obtain the perfect resin to fabric
weight ratio. The hunter stocks come standard with a Pachmayr butt pad and in a black gel coat finish
but a clear coat finish can be had as an option.

MCS-SL The grip of the MCS-SL has a nice palm swell and a dished out area for the back of your hand
which gives you a very comfortable grip while still maintaining the more traditional hunter stock look. The
comb is set at a height to give you optimum height for a hunting style scope. The standard weight is 22 to
24 ounces depending on the configuration and butt pad selection. This stock only comes in a right hand
version. The MCS-SL was designed around an Rem 700 style action, but can be had for the Win 70s with
modifications to the height of the mag box. ( The picture above is of a Winchester model 670 super short,
the finished weight is only 6.2 lbs with scope ).

MCS-UL The construction of this stock is designed after our benchrest stocks. The barrel and action
areas are molded into the shell of the stock, once assembled it becomes a truly seamless shell.The only
cuts in the shell are the bolt handle and pillar holes done during the bedding process. The standard weight
is 24 to 26 ounces depending on the configuration. This stock has basically the same outer dimensions as
our MCS-T stock. The forend is 1.75 wide at the tip and rounded to a beaver tail that is flat. The MCS-UL
only comes set up for a Rem 700 style action, a #7 contour barrel channel and a butt pad installed up to a
pull of 14.5". This stock has a high cheek piece and a nice palm swell. The forend and palm swell feature
a heavy molded in textured surface for a sure grip.

MCS-T This is our more traditional hunting / tactical stock. The standard weight is 2.5 lbs but can
be had as light as 2.1 lbs. The forend is 1.75 wide at the tip and rounded to a beaver tail that is flat.
The forend is also wide enough to accept a #7 barrel which is about 1.125" diameter at the tip of the
stock. The MCS-T comes standard with a 1" Pachmyer Decel pad installed at a length of pull at
13.5". This stock has a high cheekpiece and a nice palm swell. The forend and palm swell feature a
heavy molded in textured surface for a sure grip. Rem 700 s/a is the standard inlet but others can be
special ordered.

MCS-T3 This is one of or new designs, it is a good all around hunting / tactical stock. The standard
weight is 2.6 lbs but can be had as light as 2.2 Lbs. The forend is 2.40” wide at the tip and will take
straight taper barrels up to 1.350 inches in diameter.. The MCS-T3 comes standard with a 1" Pachmyer
Decel pad installed at a length of pull at 13.5". This stock has a high cheekpiece and a nice palm swell,
and a little longer grip than the MCS-T stock. The forend and palm swell feature a light molded in texture.

MCS-TC-ICON This is one of or new designs, it is for the Thompson Center Arms new Icon action. It
is a 100% carbon fiber, and comes as a bolt in stock with the factory aluminum block already installed.
Call for more details and price.